ZINAK Synthetic Enamel
Technical Data Sheet
Product Description: ZINAK Synthetic Enamel based on high quality synthetic alkyd and light fast and opacifying pigment. ZINAK Synthetic Enamel is a time tested and proven. It is recommended for suitably primed wooden, masonry and metal surfaces. ZINAK Synthetic Enamel gives a hard, durable and full glossy film with smooth finish. It has a very high degree of gloss and colour retention.
Recommended Usage: ZINAK Synthetic Enamel is recommended for all suitably primed and under coated interior and exterior wooden, masonry and metal surfaces, where high standard of durability is expected.
Technical Data
Coverage : On smooth non absorbent surfaces. 110 to 140 sq.fit/Ltr/coat.**
Drying Time : Surface dry: 5 hrs. Hard dry: Over night.
Gloss level : Glossy
Thinning with : 20% to 30% by volume with ZINAK GP Thinner or MTO.
Stability of Thinned Paint : 24 to 30 Hrs.
Flash Point : Not below 30°C.
Self Life : 1 year from date of manufacture original tightly closed container away
from direct sunlight and excessive heat.
Recoating Period : 6 to 8 Hrs. Approximate.
Method of application : Brush, Spray or Roller.
** Actual covering capacity may vary depending upon the surface condition, temperature, wind velocity, application skill, surface roughness, surface porosity and shade to shade.
Product Performance:
* High Gloss * Hard durable film * Excellent hardness and water resistance
* Excellent flow to get uniform level and smooth finish * Can be tinted with universal colorant
* Excellent color retention and chalk resistance * Excellent out-door durability
* Improve workability- Easy application * Better corrosion resistance
Surface Preparation: Ensure that surface should be clean, free from all defective or poorly adhering material like oil, grease, wax, rust, dust, etc. Remove all loose or poorly adhering materials by rubbing down using abrasive paper and thereafter wipe off. Apply a coat of ZINAK Primer followed by putty(if required) to level the dents and make the surface uniform. Apply again a coat of ZINAK Primer. Then apply two coats of ZINAK Synthetic Enamel.
Post Application Instruction: For removing stains sponge clean with a mild soap solution and wipe clean. Ensure a drying time of 1 week before cleaning.
Safety Feature: Flammable.
Pack Size: 50 ml, 100 ml, 200 ml, 500 ml, 1ltr, 4ltr, 10ltr and 20ltr.
Shade Range: As per requirement.
Precautions:
* Away from the source of ignition and fire. * Avoid extra thinning for better result.
* Stir well before use. * The container must be tightly closed when not in use.
* Keep away from direct sunlight, hear and children.* In case of eye/skin contact wash plenty of water.
* Use safety equipments like hand gloves, safety goggles/glasses & face mask.
* Store in well ventilated location. * Do not apply temperature below 10°C.
* Can be tinted with universal stainer before thinning. Avoid excess stainer. Stir well tinted paint before application.
Pricing Details
Product Specifications
Content library
Know more about us
ZINAK Synthetic Enamel
Technical Data Sheet
Product Description: ZINAK Synthetic Enamel based on high quality synthetic alkyd and light fast and opacifying pigment. ZINAK Synthetic Enamel is a time tested and proven. It is recommended for suitably primed wooden, masonry and metal surfaces. ZINAK Synthetic Enamel gives a hard, durable and full glossy film with smooth finish. It has a very high degree of gloss and colour retention.
Recommended Usage: ZINAK Synthetic Enamel is recommended for all suitably primed and under coated interior and exterior wooden, masonry and metal surfaces, where high standard of durability is expected.
Technical Data
Coverage : On smooth non absorbent surfaces. 110 to 140 sq.fit/Ltr/coat.**
Drying Time : Surface dry: 5 hrs. Hard dry: Over night.
Gloss level : Glossy
Thinning with : 20% to 30% by volume with ZINAK GP Thinner or MTO.
Stability of Thinned Paint : 24 to 30 Hrs.
Flash Point : Not below 30°C.
Self Life : 1 year from date of manufacture original tightly closed container away
from direct sunlight and excessive heat.
Recoating Period : 6 to 8 Hrs. Approximate.
Method of application : Brush, Spray or Roller.
** Actual covering capacity may vary depending upon the surface condition, temperature, wind velocity, application skill, surface roughness, surface porosity and shade to shade.
Product Performance:
* High Gloss * Hard durable film * Excellent hardness and water resistance
* Excellent flow to get uniform level and smooth finish * Can be tinted with universal colorant
* Excellent color retention and chalk resistance * Excellent out-door durability
* Improve workability- Easy application * Better corrosion resistance
Surface Preparation: Ensure that surface should be clean, free from all defective or poorly adhering material like oil, grease, wax, rust, dust, etc. Remove all loose or poorly adhering materials by rubbing down using abrasive paper and thereafter wipe off. Apply a coat of ZINAK Primer followed by putty(if required) to level the dents and make the surface uniform. Apply again a coat of ZINAK Primer. Then apply two coats of ZINAK Synthetic Enamel.
Post Application Instruction: For removing stains sponge clean with a mild soap solution and wipe clean. Ensure a drying time of 1 week before cleaning.
Safety Feature: Flammable.
Pack Size: 50 ml, 100 ml, 200 ml, 500 ml, 1ltr, 4ltr, 10ltr and 20ltr.
Shade Range: As per requirement.
Precautions:
* Away from the source of ignition and fire. * Avoid extra thinning for better result.
* Stir well before use. * The container must be tightly closed when not in use.
* Keep away from direct sunlight, hear and children.* In case of eye/skin contact wash plenty of water.
* Use safety equipments like hand gloves, safety goggles/glasses & face mask.
* Store in well ventilated location. * Do not apply temperature below 10°C.
* Can be tinted with universal stainer before thinning. Avoid excess stainer. Stir well tinted paint before application.
Pricing Details
Product Specifications
What our customers say about us
Our wide range of products and services
